1 pound or more
gets shipped UPS
|
My Shopping Cart: $4.49
| onlybatterypacks.com MINELAB EXCALIBUR |
|
NICAD CHARGER RERQUIREMENTS;
1) TRICKLE CHARGE 300mA MAX
NOTE: ALL PACKS WILL WORK WITH THE ORIGINAL MINELAB EXCALIBER TRICKLE CHARGER.
Installation instructions are located in our PDF file section.
The NEW 9.6v 2600 & 2700 packs will fit and operate the Minelab 800/1000 for over 2x longer than the original 12v pack.
| ID |
Image |
Description |
Pieces |
Cost($) |
Shop! |
| 12126 |
 |
#S2708B-9V 9.6v 2700mah NiMH battery for Minelab Excalibur Alkaline pods. Thermal safety circuit installed.
Cell: SANYO 2700mah AA
Discharge rate: 5amps
Connector: 9v
Size; L 4.25" x W 1.12" x H 1.12".
Weight; 9oz.
Application: fits Minelab Excalibur Alkaline pods. Comes with the adapter to hook up to #11535 peak charger. |
1 |
40.00USD |
 |
|
|---|
| 12058 |
|
#2508B-9V 9.6v 2500mah NiMH battery for Minelab Excalibur Alkaline pods. Thermal safety circuit installed.
Cell: 2500mah AA
Discharge rate: 5amps
Connector: 9v
Size; L 4.25" x W 1.12" x H 1.12".
Weight; 9oz.
Application: fits Minelab Excalibur Alkaline pods. Comes with the adapter to hook up to #11535 peak charger. |
1 |
24.95USD |
|
|
|---|
| 12336 |
 |
#S1110FMS 12v NiCAD 1100ma MINELAB SOVEREIGHN XS battery pack. Thermal safety circuit installed.
Voltage: 12
Polarity: center positive
Cell: Sanyo 1100mA AA
Discharge rate: 10amps
Connector: BARREL POWER
Size; L 3.94" x W 2.80" x H .57".
Weight; 9oz.
NOTE: works with the Minelab trickle charger. |
1 |
34.00USD |
|
|
|---|
| 12337 |
|
#2610FMS 12v NiMH 2600ma MINELAB SOVEREIGHN XS battery pack. Thermal safety circuit installed.
Voltage: 12
Polarity: Center Positive
Cell: 2600mA AA
Discharge rate: 3amps
Connector: BARREL POWER
Size; L 3.94" x W 2.80" x H .57".
Weight; 9oz.
NOTE: works with the Minelab trickle charger. |
1 |
38.00USD |
|
|
|---|
| 12027 |
 |
#1510MES 12v NiMH 1500ma MINELAB EXCALIBUR II 800 & 1000 battery pack. Thermal safety circuit installed. Fits new and older style shorter pods. Also fits the Alkaline pod. Long life premium cell.
Voltage: 12
Cell: 1500mA 2/3 A
Discharge rate: 30amps (PREMIUM CELL)
Connector: 9v
Size; L 4.07" x W 1.31" x H 1.31".
Weight; 9oz.
NOTE: works with the Minelab Excalibur trickle charger. |
1 |
39.00USD |
|
|
|---|
| 12515 |
 |
NiMH/Nicad Peak Charger 7-10 cell (8.4-12v), 115/240vac input. Plugs right into the Minelab pod- no adapter required.
FEATURES:
-Charges 7-10 cell Nicad & NiMH battery packs
-Microprocessor controlled negative delta peak detection circuit
-115/240vac input
-Automatically senses pack voltage
-Red/green LED charge indicator lights
-Charge rate 700mA
-Automatic trickle charge mode: 100ma
-Charges packs from 1000ma AAA to 10,000ma D
-Typical charge time for a 3000mah pack 4.5 hours -Connector: Kyosho male, You can select charging adapters in checkout
Weight: 6oz.
NOTE- Select the charging connector you need in checkout.
|
1 |
20.32USD |
|
|
|---|
| 11534 |
 |
MINELAB EXCALBUR CHARGING ADAPTER
5.5mm X 2.1mm to Female Tamiya
Center Positive
Amperage Rating: 3 Amps
Wire Size: 22awg
Length: 3"
Weight: 1oz |
1 |
3.50USD |
|
|
|---|
| 12191 |
 |
9 volt to Female Tamiya charging adapter
Amperage Rating: 3 Amps
Wire Size: 22awg
Length: 3"
Weight: .2oz.
Application: JR Z-1, XR2i, XR3i, XS3, XS3 PRO, SPEKTRUM DX2, DX2.0, DX3, DX3.0, MAX, DX3 Tx Battery Packs |
1 |
3.50USD |
|
|
|---|
| 12242 |
 |
MINELAB E-TRAC CHARGING ADAPTER
3.5mm X 1.7mm to Female Tamiya
Center Positive
Amperage Rating: 3 Amps
Wire Size: 22awg
|
1 |
3.50USD |
|
|
|---|
|
|
