Great Battery & Charger Combo Package — Give as a gift or personally use as a great battery replacement.
This Combo Includes:
- 2 X Tenergy 7.2V 3000mAh Flat NiMH High Power Battery Packs with Tamiya Connectors
- 1 X Tenergy Smart Universal Charger for NiMH / NiCd Battery Packs (7.2V – 12V 1.8A)
7.2v 3000mah NiMH Battery Pack Features and Benefits:
- High Capacity High Power Nickel Metal Hydride Battery Pack for RC cars.
- NiMH technology enables convenient charging at any time. No cell memory effect. No need to fully discharge before recharging.
- HIgh power delivery with 38 Amp maximum discharge rate.
- Uniquely designed & manufactured for high RC Racing performance.
- Fits with popular standard 7.2V RC cars like:
- Kyosho, etc.
- 6 months warranty.
- Standard Dimension: 5.39"x1.87"x0.95" inch, fits all RC10 cars
- Weight: 11.5 Oz
- Capacity: 3000 mAh
- Voltage: 7.2V
- Connector: Standard Tamiya
- Standard Charge: 12 hours @ 300 mA
- Rapid Charge: 1.5 hours @ 3000 mA
7.2V – 12V Smart Universal Charger
Features and Benefits
- Best Charger for charging all RC Car, RC air and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V.
- Universal for any NiMH /NiCd battery packs 7.2V – 12V (6-10 Cells pack)
- Fast charger with current switch to select either, 0.9A and 1.8A. Delivers full charge within 1 – 2 hours.
- Charging Current 0.9A for battery packs with capacity from 1100mAh -2200mAh. For 2000 mAh pack, charging time is 1 hour.
- Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours.
- Smart Charger with automatic voltage detection.
- Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack’s cycle life.
- Red LED will be on during charging.
- Automatically charging ending with negative delta V.
- Worldwide usage with 120-240V AC
- With Temperature sensor
- Safety protection fuse for over current, short circuit & reverse polarity protection.
- 1 standard Tamiya Female connector.
- 1 connector adaptor from standard Male Tamiya to Mini Female.
- 1 set of clip adaptor with Male Tamiya connector on one end.
Smart Charger Specification
- FOR 6V-12V NI-MH/NI-CD BATTERY PACK 6-10PCS BATTERY
- Input: AC100-240V
- Output: 6-12V 0.9or1.8A
- Connect battery pack to output connector and plug AC power source.
- Make sure battery polarity is connected correctly (Red wire is positive)
- Charger will detect battery voltage automatically, Red LED will be on during charging
- When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be on
- Battery will be charged at 0.9A or 1.8A constant current,
- Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh battery.
- The charger is designed for faster charging NiCd and NiMH battery packs from 6 to 12V for RC car/Air and Air soft gun.
- Don’t charge battery packs with voltage less than 6V or voltage greater than 12V and capacity smaller than1100mAh.
- Battery pack must be made by high drain current cell.
- Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by misuse.