Tenergy NCR18650B 3.6V 3350mAh Button Top Rechargeable Battery w/PCM protection


in stock
SKU: b5c80b4fa0fc

Buy product



Product Summary

  • 3.6V 3350mAh high capacity
  • Higher energy density, higher capacity and lower weight than other types rechargeable batteries
  • Internal PCB protection (patent pending design) prevents under-voltage at 2.5V and over-voltage at 4.25V to improved battery safety
  • Free from Leakage of Liquid Electrolyte.
  • Low Battery Internal Impedance
  • Perfect battery choice for flashlight, torch light and camping lantern application
  • Unit size: 1.9*1.9*6.9 cm / 0.75*0.75*2.72 in (L*W*H)
  • Item weight: 52 g / 1.83 oz
  • Warning: PROTECTED Li-ion 18650 batteries are made for high performance flashlights, not suitable for e-cig mods.

Technical Data

Technical Data

  • Chemistry: Li-Ion
  • Nominal Voltage (V): 3.6V
  • Capacity (mAh): 3350
  • Max Continuous Discharge Current: 3.5A
  • Weight: 52g
  • Dimensions:
    • Height: 69mm
    • Diameter: 19mm
  • Charge Cut-Off Voltage: 4.20 ± 0.05V
  • End Voltage: 2.5V
  • Internal Impedance: <155mΩ

Download Product Datasheet Here

Disclaimer & Safety Warning Before Use:
– By purchasing Lithium Polymer and Li-ion/LifeP04 battery, the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions, please consider Nimh or Nicd battery or return the battery immediately before use.
– Under no circumstances should this battery be used with e-cigarette.
– Li-Ion/LifeP04 Batteries may explode if charged or discharged improperly.
– You must possess knowledge of electronic and understand how to handle Li-ion battery.
– We reserve the right not to sell and void the warranty it you don’t meet the above statement.
– You must use a protection IC (PCB) to keep battery from overcharged and over-discharged
– Never solder directly onto the Li-ion battery as overheat might cause battery to explode. If you are making a pack or need to solder batteries together, you need to get battery with tabs on it. You will solder to tabs instead directly onto the battery.
Please read additional safety warnings on Li-Ion/LiPO batteries

Theme Settings