All-around charging solution for anyone who Airsofts.
Awesome price, great charging time, and Smart Charging capabilities (so you don’t have to guess when the battery pack is full).
Not limited to just Airsoft — use it for any 8.4v or 9.6v NiMH Battery Packs that are used in RC Cars/Airplanes. Just make sure connector is Standard or Mini Tamiya!
Features and Benefits:
- Smart Charger for NiMH battery packs of 8.4V-9.6V (7-8 cells).
- Recommended battery packs with capacity of 600mAh-2500mAh.
- Able to auto distinguish bad battery and indicate malfunction.
- Able to activate over-discharged cells.
- Current ram-up way benefits cell capacity and life cycle.
- Unique test mode guarantees high quality.
- Automatically stop when battery pack is fully charged by Delta Peak detection.
- Short circuit & reverse polarity protections.
- Compact battery pack charger with LED.
- Built in mini male tamiya connector (charger side).
- UL Certified
- Smart AC Charger for 8.4 – 9.6V NiMH Battery Pack.
- Mini Tamiya to Standard Tamiya Adapter
- Instruction Manual.
- Packaged in box.
|Rating Input Voltage||100~240V AC 50/60Hz|
|Rating input current||0.2Amp|
|Output voltage Rating||8.4V/9.6V VDC|
|Output voltage range||7V DC~12DC|
|Timer Cutoff||5 hours|
|Max Output Power||7.3W|
|Operating Temperature||-10~30*C (UL Certification)|
|Maximal -Delta V||5mV/cell|
|Operating Humidity||<90% RH|
- Don’t use the charger for low capacity (under 600mAh), high capacity (over 2500mAh) or non-rechargeable battery packs. There is a timer cutoff of 5 hours; battery packs over 2500mah may not fully charge.
- Strongly suggest use recommended batteries by Tenergy like Tenergy brand high drain rate battery pack. We are not responsible for any damage caused by charging other brand battery using this charger.
- Pay attention to battery surface temperature. Stop charging when it feels very hot.
- Keep an eye on the battery pack when charge current is high. Do not charge for a long time with such big current.
- The unit charge for Ni-MH battery packs only